pdf PDF

Oberon Logo5 Model 1006-AP325
Right-Angle AP Wall Bracket for Aruba AP325
Category: Wall and Hard Ceiling - Surface Mount - Right-Angle Brackets
 
Shown with AP (not included)

Many AP manufacturers recommend APs be mounted in a horizontal orientation. Secure APs from most manufacturers in areas where wall mounting may be required, such as residence halls, hotels, and other hard lid venues. The AP is partially recessed into the right-angle bracket, exposing only the antenna face of the AP. Conduit, raceways, and cable can be terminated in the bracket. The AP can be locked in place using the manufacturer's locking features. Specify AP and model when ordering.

NOTE: The Aruba AP-325 (only) has a BLE (Bluetooth low energy) antenna on the back side of the AP. This BLE antenna may not provide the desired coverage when mounted in an Oberon mount or enclosure. If you intend to use BLE services with the Aruba AP-325 access point in an Oberon product, please contact your Oberon customer service representative for an appropriate solution.



Aruba Networks Certified
 
Features & Benefits
  • Conveniently install wireless APs on walls and above ceilings
  • Enables wireless access points to be mounted in preferred horizontal orientation
  • AP is partially recessed into bracket, providing aesthetic appearance
  • Can be mounted directly over telecommunications outlet
Technical Specifications
  • Design: Right-angle mounting bracket for securing wireless access points on walls. Designed to mount the access point in the preferred horizontal orientation. For Aruba AP325.
  • AP is partially recessed into bracket, providing aesthetic appearance
  • Construction: 12 ga. white powder-coated steel
  • Size: 10.25 inches by 10.5 inches by 2.5 inches (260mm by 260mm by 64mm)

Configurations

 Model Number Guide:

Model Number Designed for AP Model
1006-AP225 Aruba Networks AP225
1006-AP325 Aruba Networks AP325
1006-AP335 Aruba Networks AP335
1006-CCOAP Cisco 2600, 2700, 3500, 3600, 3700 Series APs
1006-CCOAP3800 Cisco 1830, 1850, 2800, 3800 Series APs
1006-HLA Cisco AP with hyperlocation antenna
1006-EX3935 Extreme Networks APs

Measurements (Maximum values):
Height: 10.25 in.
Width: 10.5 in.
Depth: 2.5 in.
Item Weight: 4 lbs.
Shipping Weight: 6 lbs.

Includes
  • (1) Right-Angle Bracket
  • (1) AP mounting plate
  • (1) Installation instructions

Documentation Links
Oberon symbol Spec Sheet - oberoninc.com/index.php?option=com_content&view=article&id=2545&Itemid=399
Installation Instructions - oberoninc.com/images/WebDocs/Model1006-AP325_Installation_Instructions.pdf

Customer Prints
- oberoninc.com/images/WebDocs/Model1006-AP325_Customer_Print.pdf
pdfSECTION 27_21_33 DATA COMMUNICATIONS WIRELESS ACCESS POINTS -
http://oberoninc.com/images/WebDocs/SECTION 27_21_33 DATA COMMUNICATIONS WIRELESS ACCESS POINTS.pdf
Images and documents may depict similar models in the product series.
 

Dimensional Images
Model 1006-AP325 Dimensional image