pdf PDF

Oberon Logo5 Model 1008-HLA-COVER
Right-Angle AP Joist or Wall Bracket with Black Vanity Cover for Cisco AP and HLA antenna
Category: Wall and Hard Ceiling - Surface Mount - Right-Angle Brackets
 
N/A

Mount APs in open ceilings with this convenient joist or wall mounting solution. Quickly install AP in preferred horizontal orientation. Includes two beam clamps and a paintable, plastic vanity cover which is virtually transparent to wireless signal. Ideal for restaurants and retail environments with open ceilings. Conduit, raceways, and cable can be terminated in the bracket to for a clean appearance. The AP can be locked in place using the AP manufacturer's locking features.


Cisco Developer ideal for wireless networks
 
Features & Benefits
  • Conveniently install and conceal AP in open ceiling environment
  • Enables APs to be mounted in preferred horizontal orientation
  • Painting the AP may void manufacturers warranty, so Oberon includes a paintable, black plastic vanity cover (please see CONFIGURATIONS)
  • T-bar bracket accommodates APs from most vendors; includes features for mounting Cisco AIR-BRACKET directly to the right-angle bracket
  • Beam mount clamps allow it to be mounted directly to a beam or truss
Technical Specifications
  • Design: Right-angle mounting bracket for securing APs on walls, and on ceiling joists and beams in open ceilings. Designed to mount the AP in the preferred horizontal orientation. Includes beam clamps and black vanity cover for Cisco AP and HLA antenna.
  • Includes adjustable T-bar bracket for attaching most vendors’ APs, black beam clamps and hardware, and Oberon 39-HLA-PLATE for HLA antenna
  • Construction: 10 ga. black powder-coated steel    
  • Includes Oberon Model 33-HLA-COVER, attachable, paintable black UL94-5VA ABS plastic vanity cover, transparent to wireless signal
  • Size: 8.5 inches by 7 inches by 3 inches (215 mm by 178 mm by 76 mm)
Standards for Safety
  • UL-95-5VA ABS plastic vanity cover
Measurements (Maximum values):
  • Height: 8.5 in.
  • Width: 7.00 in.
  • Depth: 3.00 in.
  • Item Weight: 2.5 lbs.
  • Shipping Weight: 3 lbs.
Includes
  • (1) Right-angle mount
  • (2) Beam clamps
  • (1) T-bar bracket
  • (1) Wire tie
  • (1) Vanity cover (please see CONFIGURATIONS)
  • (2) Interlocking adhesive strips
  • (2) #6 - 32 screw (for attaching T-bar bracket)
  • (4) #8 - 32 screw (for attaching AP mounting plate)
  • (1) Installation instructions

Configurations: Model 1008

Please specify configuration when ordering.

  Includes Vanity Cover # Designed for AP Model
1008-00 N/A Cisco, Aruba and other vendors' APs
1008-AP-COVER 33-AP-COVER Cisco and Aruba APs (except Cisco 3800 series)
1008-AP3800-COVER 33-AP3800-COVER Cisco 1830, 1850, 2800, 3800 series APs
1008-HLA-COVER 33-HLA-COVER Cisco HLA AP and Antenna
1008-MR-COVER 33-MR-COVER Meraki MR32, MR34, and MR42 APs
Available Accessories
  • 39-HLA-PLATE - Bracket accessory for Cisco Hyperlocation Antenna
  • 39-1008-SPKRMNT - Mounting bracket assembly for the Model 1008/1009 series
Videos
 Oberon, Inc. YouTube Channel - (https://www.youtube.com/user/oberoninc)
 1008 Series Installation Video - (https://youtu.be/pTQ-63wLtdY)

3D Interactive Models
3D Model Viewer at oberoninc.com

Documentation Links
Oberon symbol Spec Sheet - oberoninc.com/index.php?option=com_content&view=article&id=2626&Itemid=399
 Installation Instructions - oberoninc.com/images/WebDocs/Model1008-00_Installation_Instructions.pdf
 Customer Prints - oberoninc.com/images/WebDocs/Model1008-HLA-COVER_Customer_Print.pdf
 SECTION 27_21_33 DATA COMMUNICATIONS WIRELESS ACCESS POINTS
http://oberoninc.com/images/WebDocs/SECTION 27_21_33 DATA COMMUNICATIONS WIRELESS ACCESS POINTS.pdf
 Images and documents may depict similar models in the product series.
 

Dimensional Images
Model 1008-HLA-COVER Dimensional image