Home SiteMap Contact
 
 
 

  Press Releases

  

When business depends on the free flow of wireless data throughout an organization, ensuring physical security and compliance with industry guidelines become key factors in network design.

 

State College, PA – June 9, 2015

Physical security of wireless access points is required by industry standards in fields such as retail, government, and healthcare.  Guidelines requiring such physical security can be found in such diverse documents as the National Electric Code (NEC), Payment Card Industry Data Security Standard (PCI-DSS), Federal Information Processing Standard (FIPS), Infection Control Risk Assessment (ICRA), and Health Insurance Portability and Accountability Act (HIPAA).  Whether the goal is to prevent removal of equipment which accesses private data, or preventing ceiling gaps through which infection may be spread, the way in which access points are protected has become and important component of network design best practices.

Oberon’s Model 1077-CCOAP is a locking 2’ x 2’ wireless LAN AP mounting solution. The ceiling tile insert secures a Cisco AP via a bracket in the door, locking it in place when the door is closed. Once installed, this ceiling enclosure permits controlled access to components without lifting ceiling tiles.   The enclosure ensures the equipment is properly secured while offering a clean, professional aesthetic and simplifying future maintenance.

The Model 1077 series offers a variety of interchangeable retrofit doors to permit easy vendor and technology migrations.   The steel enclosure fits into a standard suspended ceiling grid.

For more information regarding Oberon's mounting solutions for wireless access points, please call 1-877-867-2312 or visit http://oberonwireless.com.  The company's website includes an Enclosure Finder for the enclosures offered for specific wireless access points.


1077-CCOAP

pdfPDF

Oberon Logo5 Model 1077-CCOAP
3" deep Susp Ceiling Zone Enclosure-Cisco AP
Category: Suspended Ceiling Enclosures with Doors
1077-CCOAP
Locking, 2' x 2' suspended ceiling tile enclosure mounts and secures wireless access points flush to the ceiling. The interchangeable door simplifies access point and antenna moves, adds, and changes without lifting ceiling tiles. Access points can be mounted in the door or inside the enclosure with the configurations with the ABS dome. “-T” version matches tegular ceiling tiles used in recessed grids. Specify –T version for professional, aesthetic installation in recessed grid ceilings.

Cisco DeveloperUL ListedIdeal for wireless networksOSHPD logo
Features & Benefits
  • 2’ x 2’ locking ceiling tile enclosure secures wireless access points from most vendors
  • Attractive, textured, powder-coat finish matches many ceilings
  • Interchangeable doors permit simple migration to new access points and antennas
  • Shallow (3”), lightweight, aluminum back-box simplifies installation in ceilings with little space above ceiling tiles
  • Enclosure back-box is effective dust barrier to simplify ICRA procedure compliance
Technical Specifications
  • Design: Lightweight ceiling tile enclosure designed for wireless access points with integrated antennas. Interchangeable door. Fits into standard 2’ x 2’ (U.S.) ceiling grid. Designed for Cisco APs.
  • Performance: UL Listed and designed to meet NEC300-22 and 300-23 for plenum installations. OSHPD approved OPM-0110-13.
  • Locking, fully-hinged interchangeable doors for different access points
  • Include firestop foam kit for cable egress
  • .75” trade size knockout on two walls. Junction box knockout in back-box
  • Back-box: Effective as a dust barrier for ICRA procedure compliance
  • Construction: 16 ga. aluminum clear coat back-box; 14 ga. door; textured, white, powder-coated steel door and flange; back-box is effective as a dust barrier for ICRA procedure compliance
  • Enclosure must be supported by the building structure, independent of the suspended ceiling, per NEC paragraph 300.11; includes hanger wire
  • Maximum weight inside enclosure is 25 lbs.
  • For recessed grid ceilings, designate “–T” for tegular flange units
  • AP max. operating temperature should be de-rated by 10° C inside the  enclosure
  • Size: Flange is 23.75 inches by 23.75 inches (603 mm by 603 mm), enclosure back-box is 12.75 inches by 12.75 inches by 3.0 inches deep (324 mm by 324 mm by 77 mm deep)

Standards for Safety
  • UL 50 listed, TYPE 1, for indoor use only
  • USL - Investigated using requirements contained in Standard UL 50 - Twelfth Edition, and UL 50E - First Edition
  • CNL - Investigated using requirements contained in Canadian Standard CSA/C22.2 No. 94.1 and 94.2
  • UL 2416, Audio/Video, Information and Communication Technology Equipment Cabinet, Enclosure & Rack Systems
  • CSA C22.2 NO. 60950-1-07 + Amd. 1 Amd. 2 Information Technology Equipment -- Safety. Part 1, General Requirements
  • OSHPD Approval OPM-110-13

Measurements (Maximum values):
Height: 23.75 in.
Width: 23.75 in.
Depth: 3 in.
Item Weight: 11 lbs.
Shipping Weight: 15.5 lbs.

Includes
  • (1) Unit
  • (1) T-bar bracket
  • (1) Mounting bracket
  • (1) ¾” Trade size conduit connectors
  • (1) Fire Block Foam
  • (2) #8 – 32 wing nut
  • (4) Lock washer
  • (4) Support wire
  • (2) Keys for access door lock
  • Installation instructions

Documentation Links
Oberon symbolSpec Sheet - oberoninc.com/index.php?option=com_content&view=article&id=1249&Itemid=399
Installation Instructions - oberoninc.com/images/WebDocs/Model1077-CCOAP_Installation_Instructions.pdf

Customer Prints
- oberoninc.com/images/WebDocs/Model1077-CCOAP_Customer_Print.pdf

OSHPD OPM Drawing - http://oberoninc.com/images/WebDocs/Oberon_OPM.pdf
pdfSECTION 27_21_33 DATA COMMUNICATIONS WIRELESS ACCESS POINTS -
http://oberoninc.com/images/WebDocs/SECTION 27_21_33 DATA COMMUNICATIONS WIRELESS ACCESS POINTS.pdf

Wireless Access Point Mounting Solutions & Enclosures

Find an Oberon enclosure
or mounting solution
for your wireless equipment

Share This

Follow Us

Contact Information

Telephone:

1-877-867-2312 (Toll Free)
1-814-867-2312
Product Support: x204

Fax:

814-867-2314

Mailing Address:

1315 S. Allen Street
Suite 410
State College, PA 16801

Contact Sales: