Home SiteMap Contact
 
 
 

Economical Ceiling Mounts

1044-ANTMNT

1044 with knockouts to support antenna installation

1044-ANTMNT: Model1040_ZDual.jpg

Oberon symbol Spec Sheet
OSHPD OPM Drawing
  3D  Model Viewer: Aruba AP

Orientation: Ceiling

The Model 1044 is an economical, aesthetic, and easy-to-install suspended ceiling mounting kit for APs and antennas from most vendors. A cutout is made in the ceiling tile, and the tile bridge is placed above the ceiling tile. The AP or antenna is attached to the white trim. The AP/antenna/trim assembly is then drawn into the ceiling tile bridge with torsion springs, as with some recessed lighting fixtures, with only the front face exposed for ideal, unobstructed wireless coverage. Model 1044-FL recesses AP behind a low profile ABS plastic cover. AP trim can be easily swapped out for new trim if the AP brand or model is changed in the future.

1044-AP315

AP Mount Tile Bridge w/Back-Box - Aruba AP315

1044-AP315: Model1040_1044-AP3xx_S_trim_rendering.jpg

Oberon symbol Spec Sheet
Installation Instructions
Customer Prints
OSHPD OPM Drawing
  3D  Model Viewer: Aruba AP

Orientation: Ceiling

The Model 1044 is an economical, aesthetic, and easy-to-install suspended ceiling mounting kit for APs and antennas from most vendors. A cutout is made in the ceiling tile, and the tile bridge is placed above the ceiling tile. The AP or antenna is attached to the white trim. The AP/antenna/trim assembly is then drawn into the ceiling tile bridge with torsion springs, as with some recessed lighting fixtures, with only the front face exposed for ideal, unobstructed wireless coverage. Model 1044-FL recesses AP behind a low profile ABS plastic cover. AP trim can be easily swapped out for new trim if the AP brand or model is changed in the future.

1044-AP335

AP Mount Tile Bridge w/Back-Box - Aruba AP335

1044-AP335: Model1040_1044-AP3xx_S_trim_rendering.jpg

Oberon symbol Spec Sheet
Installation Instructions
Customer Prints
OSHPD OPM Drawing
  3D  Model Viewer: Aruba AP

Orientation: Ceiling

The Model 1044 is an economical, aesthetic, and easy-to-install suspended ceiling mounting kit for APs and antennas from most vendors. A cutout is made in the ceiling tile, and the tile bridge is placed above the ceiling tile. The AP or antenna is attached to the white trim. The AP/antenna/trim assembly is then drawn into the ceiling tile bridge with torsion springs, as with some recessed lighting fixtures, with only the front face exposed for ideal, unobstructed wireless coverage. Model 1044-FL recesses AP behind a low profile ABS plastic cover. AP trim can be easily swapped out for new trim if the AP brand or model is changed in the future.

1044-AP205

AP Mount Tile Bridge w/Back-Box - Aruba AP205

1044-AP205: Model1044-AP225.jpg

Oberon symbol Spec Sheet
Installation Instructions
Customer Prints
OSHPD OPM Drawing
  3D  Model Viewer: Aruba AP
anixter icon

Orientation: Ceiling

The Model 1044 is an economical, aesthetic, and easy-to-install suspended ceiling mounting kit for APs and antennas from most vendors. A cutout is made in the ceiling tile, and the tile bridge is placed above the ceiling tile. The AP or antenna is attached to the white trim. The AP/antenna/trim assembly is then drawn into the ceiling tile bridge with torsion springs, as with some recessed lighting fixtures, with only the front face exposed for ideal, unobstructed wireless coverage. Model 1044-FL recesses AP behind a low profile ABS plastic cover. AP trim can be easily swapped out for new trim if the AP brand or model is changed in the future.

1044-AP215

AP Mount Tile Bridge w/Back-Box - Aruba AP215

1044-AP215: Model1044-AP225.jpg

Oberon symbol Spec Sheet
Installation Instructions
Customer Prints
OSHPD OPM Drawing
  3D  Model Viewer: Aruba AP
anixter icon

Orientation: Ceiling

The Model 1044 is an economical, aesthetic, and easy-to-install suspended ceiling mounting kit for APs and antennas from most vendors. A cutout is made in the ceiling tile, and the tile bridge is placed above the ceiling tile. The AP or antenna is attached to the white trim. The AP/antenna/trim assembly is then drawn into the ceiling tile bridge with torsion springs, as with some recessed lighting fixtures, with only the front face exposed for ideal, unobstructed wireless coverage. Model 1044-FL recesses AP behind a low profile ABS plastic cover. AP trim can be easily swapped out for new trim if the AP brand or model is changed in the future.

1044-AP225

AP Mount Tile Bridge w/Back-Box - Aruba AP225

1044-AP225: Model1044-AP225.jpg

Oberon symbol Spec Sheet
Installation Instructions
Customer Prints
OSHPD OPM Drawing
  3D  Model Viewer: Aruba AP
anixter icon

Orientation: Ceiling

The Model 1044 is an economical, aesthetic, and easy-to-install suspended ceiling mounting kit for APs and antennas from most vendors. A cutout is made in the ceiling tile, and the tile bridge is placed above the ceiling tile. The AP or antenna is attached to the white trim. The AP/antenna/trim assembly is then drawn into the ceiling tile bridge with torsion springs, as with some recessed lighting fixtures, with only the front face exposed for ideal, unobstructed wireless coverage. Model 1044-FL recesses AP behind a low profile ABS plastic cover. AP trim can be easily swapped out for new trim if the AP brand or model is changed in the future.

1044-AP325

AP Mount Tile Bridge w/Back-Box - Aruba AP325

1044-AP325: Model1040_1044-AP3xx_S_trim_rendering.jpg

Oberon symbol Spec Sheet
Installation Instructions
Customer Prints
OSHPD OPM Drawing
  3D  Model Viewer: Aruba AP
Buy It Now: Accu-Tech anixter icon

Orientation: Ceiling

The Model 1044 is an economical, aesthetic, and easy-to-install suspended ceiling mounting kit for APs and antennas from most vendors. A cutout is made in the ceiling tile, and the tile bridge is placed above the ceiling tile. The AP or antenna is attached to the white trim. The AP/antenna/trim assembly is then drawn into the ceiling tile bridge with torsion springs, as with some recessed lighting fixtures, with only the front face exposed for ideal, unobstructed wireless coverage. Model 1044-FL recesses AP behind a low profile ABS plastic cover. AP trim can be easily swapped out for new trim if the AP brand or model is changed in the future.

NOTE: The Aruba AP-325 (only) has a BLE (Bluetooth low energy) antenna on the back side of the AP. This BLE antenna may not provide the desired coverage when mounted in an Oberon mount or enclosure. If you intend to use BLE services with the Aruba AP-325 AP in an Oberon product, please contact your Oberon customer service representative for an appropriate solution.

1044-CCOAP

AP Mount Tile Bridge w/Back-Box - Cisco

1044-CCOAP: Model1044-CCOAP.jpg

Oberon symbol Spec Sheet
Installation Instructions
Customer Prints
OSHPD OPM Drawing
  3D  Model Viewer: Cisco AP
anixter icon

Orientation: Ceiling

The Model 1044 is an economical, aesthetic, and easy-to-install suspended ceiling mounting kit for APs and antennas from most vendors. A cutout is made in the ceiling tile, and the tile bridge is placed above the ceiling tile. The AP or antenna is attached to the white trim. The AP/antenna/trim assembly is then drawn into the ceiling tile bridge with torsion springs, as with some recessed lighting fixtures, with only the front face exposed for ideal, unobstructed wireless coverage. Model 1044-FL recesses AP behind a low profile ABS plastic cover. AP trim can be easily swapped out for new trim if the AP brand or model is changed in the future.

1044-CCOAP3800

AP Mount Tile Bridge w/Back-Box - Cisco 3800

1044-CCOAP3800: Oberon_Model_1040-CCOAP3800-B.jpg

Oberon symbol Spec Sheet
Installation Instructions
Customer Prints
OSHPD OPM Drawing
  3D  Model Viewer: Cisco AP

Orientation: Ceiling

The Model 1044 is an economical, aesthetic, and easy-to-install suspended ceiling mounting kit for APs and antennas from most vendors. A cutout is made in the ceiling tile, and the tile bridge is placed above the ceiling tile. The AP or antenna is attached to the white trim. The AP/antenna/trim assembly is then drawn into the ceiling tile bridge with torsion springs, as with some recessed lighting fixtures, with only the front face exposed for ideal, unobstructed wireless coverage. Model 1044-FL recesses AP behind a low profile ABS plastic cover. AP trim can be easily swapped out for new trim if the AP brand or model is changed in the future.

1044-FL

AP Mount Tile Bridge w/Back-Box

1044-FL: Model1044-FL_render.jpg

Oberon symbol Spec Sheet
Installation Instructions
OSHPD OPM Drawing
 
3D Model Viewer

Orientation: Ceiling

The Model 1044 is an economical, aesthetic, and easy-to-install suspended ceiling mounting kit for APs and antennas from most vendors. A cutout is made in the ceiling tile, and the tile bridge is placed above the ceiling tile. The AP or antenna is attached to the white trim. The AP/antenna/trim assembly is then drawn into the ceiling tile bridge with torsion springs, as with some recessed lighting fixtures, with only the front face exposed for ideal, unobstructed wireless coverage. Model 1044-FL recesses AP behind a low profile ABS plastic cover. AP trim can be easily swapped out for new trim if the AP brand or model is changed in the future.

1044-AP305

AP Mount Tile Bridge w/Back-Box - Aruba AP305

1044-AP305: Model1040_1044-AP3xx_S_trim_rendering.jpg

Oberon symbol Spec Sheet
Installation Instructions
Customer Prints
OSHPD OPM Drawing
  3D  Model Viewer: Aruba AP

Orientation: Ceiling

The Model 1044 is an economical, aesthetic, and easy-to-install suspended ceiling mounting kit for APs and antennas from most vendors. A cutout is made in the ceiling tile, and the tile bridge is placed above the ceiling tile. The AP or antenna is attached to the white trim. The AP/antenna/trim assembly is then drawn into the ceiling tile bridge with torsion springs, as with some recessed lighting fixtures, with only the front face exposed for ideal, unobstructed wireless coverage. Model 1044-FL recesses AP behind a low profile ABS plastic cover. AP trim can be easily swapped out for new trim if the AP brand or model is changed in the future.

1044-BLANK

AP Mount Tile Bridge w/Back-Box

1044-BLANK: Model1040-BLANK.jpg

Oberon symbol Spec Sheet
OSHPD OPM Drawing
  3D  Model Viewer: Aruba AP

Orientation: Ceiling

The Model 1044 is an economical, aesthetic, and easy-to-install suspended ceiling mounting kit for APs and antennas from most vendors. A cutout is made in the ceiling tile, and the tile bridge is placed above the ceiling tile. The AP or antenna is attached to the white trim. The AP/antenna/trim assembly is then drawn into the ceiling tile bridge with torsion springs, as with some recessed lighting fixtures, with only the front face exposed for ideal, unobstructed wireless coverage. Model 1044-FL recesses AP behind a low profile ABS plastic cover. AP trim can be easily swapped out for new trim if the AP brand or model is changed in the future.

Wireless Access Point Mounting Solutions & Enclosures

Find an Oberon enclosure
or mounting solution
for your wireless equipment

Product Guide: Ceiling Enclosures & Mounts for APs

Oberon Product Guide--Ceiling-Enclosures-and-MountsClick for larger image