Home SiteMap Contact
 
 
 

AP Vanity Covers & Accessories

AP Vanity Covers & Accessories

Connectors, pigtails, bulkhead kits, and other accessories used in the mounting and installation of wireless access points and antennas in Oberon enclosures.

AP Vanity Covers & Accessories

AP Vanity Covers & Accessories


Connectors, pigtails, bulkhead kits, and other accessories used in the mounting and installation of wireless access points and antennas in Oberon enclosures.

 AP Vanity Covers

33-AP-COVER

33-AP-COVER

Indoor AP Vanity Cover- Black ABS

33-AP-COVER: Model1008-00.jpg

Oberon symbol Spec Sheet
Installation Instructions
Customer Prints
Buy It Now: Accu-Tech anixter icon

Orientation: Wall, Ceiling

Customize the appearance of the popular Cisco APs with Oberon's 33-AP-COVER. The vanity cover is made from a plastic transparent to wireless signals, and can be attached directly to the Cisco enterprise APs. The 33-AP-COVER is paintable so you can customize the color of the AP to partially conceal the AP or compliment interior color schemes. Coloring the vanity cover does not void the manufacturer’s warranty. Includes cover fasteners. Shown with Model 1008.

 Cabling Accessories

39-CORD-GRIP

39-CORD-GRIP

Cord Grip Connector for Pre-Terminated Cables

39-CORD-GRIP: 39-CORD-GRIP.jpg

Oberon symbol Spec Sheet
Buy It Now: Accu-Tech anixter icon

Cord Grip Connector Option - For pre-termination. The polyamide cable gland with split seal A-type clamping design is mounted through a knockout hole or cutout in an enclosure, and provides a watertight seal for pre-terminated Ethernet cable pass-through. The connector is strain relieving, even after tightening, and supports larger CAT 6a cable diameters.

39-RJ45-BULKHEAD

39-RJ45-BULKHEAD

Bulkhead Modular Pass-Through

39-RJ45-BULKHEAD: antenna-35-rj45-kit-thumb.jpg

Oberon symbol Spec Sheet
Buy It Now: Accu-Tech anixter icon

RJ-45 Bulkhead Pass-through Option - For weather/dust proof terminations of data cable.

39-BULKHD-KIT-RPSMA

39-BULKHD-KIT-RPSMA

Pigtail Cable for Antennas on Enclosure Door-RPSMA

39-BULKHD-KIT-RPSMA: antenna-35-BULKHD-KIT-RPSMAF.jpg

Oberon symbol Spec Sheet
Buy It Now: Accu-Tech

Plastic Snap-In Hole Connector •18" LMR195 RPSMA-F Bulkhead to RPSMA-M Pigtail •Washers •This RPSMA bulkhead connector snaps into the door of Oberon’s ceiling enclosures, permitting any dipole (“rubber duck”) antennas to be mounted on the door. Includes a plastic snap-in hole cover with RP-SMA(F) bulkhead connector, 18" LMR195 to RP-SMA(M) connector pigtail, and washers

39-BULKHD-KIT-RPTNC(F)

39-BULKHD-KIT-RPTNC(F)

Pigtail Cable for Antennas on Enclosure Door-RPTNC

39-BULKHD-KIT-RPTNC(F): antenna-35-BULKHD-KIT-thumb.jpg

Oberon symbol Spec Sheet
Buy It Now: Accu-Tech

Snap-In Bulkhead Connector Kit • Plastic Snap-In Hole Connector • 18" LMR195 RPTNC-F Bulkhead to RPTNC-M Pigtail • Washers • This RPTNC bulkhead connector snaps into the door of Oberon’s ceiling enclosures, permitting standard dipole (“rubber duck”) antennas to be mounted on the door. Includes a plastic snap-in hole cover with RP-TNC(F) bulkhead connector, 18" LMR195 to RP-TNC(M) connector pigtail, and washers

 Enclosure Accessories

1790

39-1790-INTERLOCK

PoE Interlock Switch - Disables AP on door open

39-1790-INTERLOCK: Model1790-pcb.jpg

Oberon symbol Spec Sheet
Installation Instructions
Customer Prints
Buy It Now: Accu-Tech anixter icon

Power over Ethernet Interlock Switch (PoE ILS): The 33-1790 PoE ILS is an optional security component for Oberon enclosures. Any unauthorized enclosure opening can be sensed and logged by the wireless system using the PoE ILS. When installed in-line with a PoE Ethernet connection to a WiFi Access Point, the PoE ILS will disrupt the incoming power to the AP when the enclosure door or lock is opened. Enterprise class access points will log this event, as will wireless controllers.

 Ceiling Mounting Accessories

1045-00

1045-00

Above Suspended Ceiling WiFi Access Point Mounting Bar for Most AP Models

1045-00: Oberon_Model_1045-CCOAP.jpg

Oberon symbol Spec Sheet
Installation Instructions
Customer Prints
Buy It Now: Accu-Tech anixter icon

Orientation: Ceiling

Model 1045 is a sturdy, above-ceiling hanger bar designed to support APs from most leading vendors. When the AP must be mounted above the ceiling, the Model 1045 secures the AP in the right location just above the ceiling tile. A support wire is included to ensure compliance with the National Electric Code (NEC®) Section 300-11, requiring an independent support. The 1045 also includes a light pipe, which can be pressed through the ceiling tile to enable observation of the APs status LED without lifting ceiling tiles.

Note: Model 1045 is not recommended for healthcare environments due to ICRA procedures. Mounting AP above ceiling tile may cause some degradation in wireless performance. Minimum order quantities apply. Please contact your Oberon Customer Service Representative.

39-CEILING-TBAR

39-CEILING-TBAR

Ceiling Grid 24" Cross T-bar

39-CEILING-TBAR: tbar.jpg

Oberon symbol Spec Sheet
Buy It Now: Accu-Tech anixter icon

39-POLE-MOUNT-BRACKET

39-POLE-MOUNT-BRACKET

Model Series 1021, 1024, 1026: Pole Mount Kit

39-POLE-MOUNT-BRACKET: polemastkit2.jpg

Oberon symbol Spec Sheet
Buy It Now: Accu-Tech anixter icon

Outdoor pole mounting bracket for Oberon Model Series 1021, 1024 and 1026 indoor/outdoor NEMA enclosures. The bracket can be used on a pole mast up to 4 inches.

Subcategories

AP Vanity Covers

 AP Vanity Covers

Cabling Accessories

 Cabling Accessories

Enclosure Accessories

 Enclosure Accessories

Ceiling Mounting Accessories

 Ceiling Mounting Accessories

Wireless Access Point Mounting Solutions & Enclosures

Find an Oberon enclosure
or mounting solution
for your wireless equipment