pdf PDF

Oberon Logo5 Model 1052-CCOAP3800
Locking Steel Suspended Ceiling Tile Wi-Fi Access Point Enclosure, 4.5 in. Deep Back Box / Cisco 2800 & 3800 Series AP Door
Category: Wi-Tile
 
Shown with AP (not included)

This locking 2 x 2 ft. suspended ceiling Wi-Tile™ enclosure is designed for Wi-FI and Small cell APs with detachable antennas. This white powder-coated steel enclosure replaces a standard ceiling tile and is UL listed for installation in the plenum space. Interchangeable doors mount leading vendors APs and antennas nearly flush to the ceiling to provide for a professional, aesthetic installation. The interchangeable doors simplify AP moves, adds, and changes without lifting ceiling tiles.

The –CCEA in the model number indicates that this enclosure has been specially sealed for use in pressurized spaces such as Hospital ORs, and to comply with City of Chicago Environmental Air (CCEA) standards, for plenum installation.

 
Cisco Developer ideal for wireless networks OSHPD logo
 
Firestop Grommet
Features & Benefits
  • Secure, conceal, and protect Wi-Fi and small cell APs in suspended ceiling areas
  • Locking ceiling tile enclosure designed specifically to secure APs with integrated or detachable antennas from most vendors
  • Interchangeable doors permit simple migration to new APs and antennas
  • Back-box is deep enough to contain most vendors APs and connectors
  • Enclosure back-box is effective dust barrier to simplify ICRA compliance in hospitals
Technical Specifications
  • Design: Ceiling tile enclosure designed for APs and DAS remote units with connectors and detachable antennas. Deep enough to enclose and secure APs for all leading vendor’s models
  • This is a steel enclosure so antennas or AP must be mounted externally or on the door. Mount up to (7) external antennas on the door using the bulkhead connector kit for dipole antennas (Oberon P/N 35-BULKHD-KIT) or Oberon 34-ZDUAL or 34-DMDUAL antennas
  • APs with internal or non-detachable antennas from most leading vendor’s may be mounted in interchangeable Model 1052 doors (See Oberon’s Model 1052 Configuration Guide)
  • Performance: UL 50 listed for line voltage powered equipment, and designed to meet NEC300-22 and 300-23 for plenum installations
  • OSHPD approved OPM-0110-13
  • De-rate AP operating temperature range by 6°C when mounted in enclosure
  • Fully hinged locking door, keyed alike. Doors are interchangeable
  • Firestop grommet for insertion into back-box, large enough for 2 Cat 6A cables
  • 1 in. trade size knockouts in four walls
  • Enclosure back box is effective as a dust barrier for ICRA procedure compliance
  • -CCEA version backbox is sealed to be used in pressurized rooms, and to be compliant with City of Chicago Environmental Air (CCEA) plenum requirements
  • For recessed grid ceilings, specify '–T' for tegular flange
  • Enclosure must be supported by the building structure, independent of the suspended ceiling, per NEC paragraph 300.11. Includes hanger wire
  • Maximum weight inside enclosure is 25 lbs.
  • Construction: 16 ga. galvanized steel back-box, 14 ga. door, textured white powder-coated steel. Model 1052-DOME includes a UL 94-5VA white ABS plastic dome. Model 1052-CP includes a UL 94-5VA clear polycarbonate dome
  • Size: Flange is 23.75 x 23.75 in. (603 x 603 x 64 mm). Backbox is 12.5 x 12.5 x 4.5 in. (318 x 318 x 114 mm)
  • Specify '-600MM' for European (metric) ceiling (594 x 594 mm tile flange. All other dimensions are the same)
Standards for Safety
  • UL 50 listed, TYPE 1, for indoor use only
  • USL - Investigated using requirements contained in Standard UL 50 - Twelfth Edition, and UL 50E - First Edition
  • CNL - Investigated using requirements contained in Canadian Standard CSA/C22.2 No. 94.1 and 94.2
  • UL 2416, Audio/Video, Information and Communication Technology Equipment Cabinet, Enclosure & Rack Systems
  • CSA C22.2 NO. 60950-1-07 + Amd. 1 Amd. 2 Information Technology Equipment -- Safety. Part 1, General Requirements
  • OSHPD Approval OPM-110-13
Measurements (Maximum values*):
  • Width: 23.75 in.
  • Height: 23.75 in.
  • Depth: 4.5 in.
  • Item Weight: 16 lbs.
  • Shipping Weight: 17 lbs.

Includes

  • AP mounting screws
  • (4) Suspension wires
  • (1) Firestop Grommet
  • Grounding screw
  • Universal T-bar internal AP mounting bracket
  • Mounting instructions

Available Accessories
  • 34-DMDUAL - Dual Band WiFi Antenna: NEMA4 Enclosures
  • 34-ZDUAL-RPTNC or 34-ZDUAL-RPSMA - Aesthetic, low profile Dual Band Wi-Fi Antennas designed for Oberon Enclosures with RPTNC or RPSMA connectors
  • 39-BULKHD-KIT-RPTNC(F) - Pigtail Cable for Antennas on Enclosure Door - RPTNC
  • 39-BULKHD-KIT-RPSMA - Pigtail Cable for Antennas on Enclosure Door - RPSM
  • 39-BLANK-PLATE: Models 1047(-T), 1052, 1076, & 1077(-T) Cisco enclosures (-CCOAP, -CCOAP3800), to temporarily fill cutout in door when AP is not in place
Documentation Links

Oberon symbol  View this Spec Sheet on oberoninc.com - oberoninc.com/index.php?option=com_content&view=article&id=3285&Itemid=399
 Installation Instructions - oberoninc.com/images/_Instructions/Oberon_Model_1052-CCOAP3800_Instructions.pdf
 Customer Prints - oberoninc.com/images/_Customer_Prints/Oberon_Model_1052-CCOAP3800_Customer_Print.pdf
 Ceiling Tile Ordering Form - oberoninc.com/images/WebDocs/Ceiling_Tile_Ordering_Form.pdf
 App Note Calculating temperature rise in Oberon NEMA enclosures - oberoninc.com/images/WebDocs/App_Note_Calculating_temperature_rise_when_mounting_wireless_LAN_access_points_into_Oberons_NEMA_and_Ceiling_Enclosures_4_29_2014.pdf
 OSHPD OPM Drawing - http://oberoninc.com/images/WebDocs/Oberon_OPM.pdf
 SECTION 27_21_33 DATA COMMUNICATIONS WIRELESS ACCESS POINTS
          http://oberoninc.com/images/WebDocs/SECTION_27_21_33_DATA_COMMUNICATIONS_WIRELESS_ACCESS_POINTS.pdf


Additional Information


Oberon symbol For Oberon product CAD files, contact customer service

Configurations: Model 1052

Please specify configuration when ordering.

1052 - AP DOOR
(see Configurations)
- CCEA (Sealed back box)
(otherwise leave blank)
SKU Description Retrofit Door P/N
1052-00 4.5 in. deep Suspended Ceiling AP Enclosure for up to 7 antennas 38-52-00
1052-ARAP215 4.5 in. deep Suspended Ceiling AP Enclosure for Aruba AP215 38-52-ARAP215
1052-ARAP225 4.5 in. deep Suspended Ceiling AP Enclosure for Aruba AP225 38-52-ARAP225
1052-ARAP305 4.5 in. deep Suspended Ceiling AP Enclosure for Aruba AP305 38-52-ARAP305
1052-ARAP325 4.5 in. deep Suspended Ceiling AP Enclosure for Aruba AP325 38-52-ARAP325
1052-ARAP335 4.5 in. deep Suspended Ceiling AP Enclosure for Aruba AP335, AP345 38-52-ARAP335
1052-ARAP515 4.5 in. deep Suspended Ceiling AP Enclosure for Aruba AP515 38-52-ARAP515
1052-ARAP535 4.5 in. deep Suspended Ceiling AP Enclosure for Aruba AP535 38-52-ARAP535
1052-COAP 4.5 in. deep Suspended Ceiling AP Enclosure for Cisco APs 38-52-COAP
1052-COAP3800 4.5 in. deep Suspended Ceiling AP Enclosure for Cisco 3800 APs 38-52-COAP3800
1052-CP 4.5 in. deep Suspended Ceiling AP Enclosure with clear plastic dome 38-52-CP
1052-DOME 4.5 in. deep Suspended Ceiling AP Enclosure with ABS dome 38-52-DOME
1052-XXXX-CCEA 4.5 in. deep Suspended Ceiling AP Enclosure designed for CCEA (see above) 38-52-XXXX-CCEA
1052-ND 4.5 in. deep Suspended Ceiling AP Enclosure, No Door  

 
 Images and documents may depict similar models in the product series.