Economical, locking, 600 x 600 mm suspended ceiling Wi-Tile™ enclosure mounts and secures Wi-Fi and Small Cell APs flush to the ceiling. This steel enclosure replaces a standard ceiling tile, and its’ larger back-box is suitable for larger APs and antennas. APs are mounted in the door, or inside the models with the ABS or frosted polycarbonate plastic dome. The interchangeable door simplifies AP and antenna moves, adds, and changes. Styles available for both standard flush grid and recessed grid ceilings (-T), and for both North American and European (metric) ceiling systems.

• Mount AP flush to the ceiling, revealing only the antenna face of the AP for optimal wireless coverage
• Attractive, textured, powder-coat finish matches many ceilings
• Larger back-box designed for securing most vendors' enterprise Wi-Fi and Small Cell APs
• Interchangeable doors permit simple migration to new APs and antennas
• Enclosure back-box is an effective dust barrier to simplify ICRA procedure compliance

• Design: Economical ceiling tile enclosure designed for APs with integrated antennas. Fits into standard 600 x 600 mm European ceiling grid. Doors available for all leading AP vendor’s models (see Oberon’s Model 1047 configuration guide)
• Performance: UL listed for low voltage applications, and designed to meet NEC300-22 and 300-23 for plenum installations. De-rate AP operating temperature range by 6°C when mounted in enclosure
• Locking, quick release interchangeable door for migration to other APs. Large door permits migration to large APs and domes
• Firestop grommet for insertion into back-box, large enough for 2 Cat6A cables
• 1 in. trade size knockouts in four walls
• Construction: 20 ga. galvanized steel back-box. 18 ga. white, powder-coated steel flange and door. Solid back-box fills opening behind AP, creating an effective fire, smoke and dust barrier to simplify ICRA compliance. Dome is virtually transparent to wireless signals. Model 1047-LPDOME only: Paintable UL 94-5VA ABS plastic dome. Model 1047-FPDOME only: UL 94-5VA Frosted Polycarbonite plastic dome
• Enclosure must be supported by the building structure, independent of the suspended ceiling, per NEC paragraph 300.11. Includes hanger wire
• Maximum weight inside enclosure is 11 kgs.
• For recessed grid ceilings, specify "–T" for tegular flange units
• Size: 600 x 600 x 76 mm. Back-box is 470 x 470 x 76 mm (-LPDOME & -FPDOME total depth is 127 mm)
• Specify "-600MM" for European (metric) ceiling (600 x 600 mm tile flange. All other dimensions are the same)

• Width: 600 mm
• Height: 600 mm
• Depth: 76 mm
• Item Weight: 7.26 kgs.
• Shipping Weight: 9.07 kgs.

• 39-BLANK-PLATE: Models 1047(-T), 1052, 1076, & 1077(-T) Cisco enclosures (-CCOAP, -CCOAP3800), to temporarily fill cutout in door when AP is not in place