1020-C-RAB-PMK

13.4 in. Skybar™ NEMA-4 Plastic Wi-Fi Access Point Enclosure with Translucent Screw-on Cover, Right-Angle Mounting Bracket Accessory,
Collection: Skybar™ | Series: 1020

Oberon’s Skybar™ 1020 series compact NEMA 4 AP enclosure is designed specifically to protect APs in challenging environments such as stadiums, auditoriums, gymnasiums, industry and outdoors. This rugged polycarbonate enclosure protects the AP from weather, pressure spray, spilling liquids, dust, and impacts, and is transparent to wireless signals so APs with body integrated antennas or small detachable antennas may be protected. The enclosure is paintable, and can be used to conceal and protect APs in many challenging locations. This is the most compact NEMA 4 enclosure for most APs. Available with clear cover (-C), Right Angle Bracket (-RAB) for wall mounting, or with Pole Mount Kit (PMK) for mounting on light poles. For under seat installations in auditoriums and public venues, Oberon recommends using the 1020-USM30 configuration with the 30º mounting bracket.

Features & Benefits

  • Compact, rugged NEMA 4 Skybar™ shaped enclosure for installing APs in physically challenging environments
  • Virtually transparent to wireless signals
  • Plastic is easily drilled and machined for custom cable ingress and installation. Enclosure is paintable
  • Cover attaches with four tamper resistant stainless steel screws, available with clear cover
  • Available in under seat mounting (1020-USM30), wall mounting (1020-RAB), and pole mounting (1020-PMK) configurations

Technical Specifications

  • Design: Compact, rugged polycarbonate AP enclosure designed for surface mounting AP indoors or outdoors, and for under seating and riser installation, wall mounting, or light pole mounting. Conceal and protect AP and cabling
  • Performance: Designed to NEMA 1, 2, 4, 4X, 12, and 13, and IEC529-IP66 specifications for indoor/ outdoor wet, dirty, or corrosive environments. UV stabilized for exposure to direct sunlight. Transparent to wireless signals. Paintable
  • Oberon Skybar™ shaped screw on cover with gasket. Cover screws must be torqued to 8 in-lbs. Cover screws are recessed into cover. Comes with standard and tamper resistant screws
  • Internal universal T-bar bracket to attach most vendor’s APs
  • -C configuration has a clear screw on cover to allow visibility of status LEDs
  • -RAB configuration mounts AP in preferred horizontal orientation on walls. Right angle bracket acts as a sun shield to reduce solar heat load
  • -PMK configuration has adjustable worm gear clamps for square and round poles with diameters from 4 to 7 in. (requires -RAB)
  • -USM30 mounts AP at 30° angle in under seat installations, or on high wall
  • For similar enclosures accommodating Cisco Series 4800 APs, please refer to Oberon Models 1021 or 1022
  • AP max. operating temperature should be de-rated by 11° C inside the enclosure, when solar loading is not present (See Oberon application note)
  • For outdoor installation, the 1020 is very light grey to reduce solar loading. Painting the 1020 a darker color will increase solar loading. Avoid mounting 1020 where it is directly exposed to the sun. The -RAB and -RAB-PMK versions right angle bracket acts as a solar shield
  • Construction: Gray Textured UL94-V0 Polycarbonate Enclosure Base, Gray Textured UL94-V0 Polycarbonate Enclosure Cover (For -00 SKUs Only), Clear Textured UL94-V0 Polycarbonate Enclosure Cover (For -C SKUs Only), 18 Ga. White Powder Coated Steel T-Bar Bracket, 10 Ga. Gray Powder Coated Steel Right-Angle Bracket (For -RAB SKUs Only), 14 Ga. Gray Powder Coated Steel Pole Mount Brackets (For -PMK SKUs Only), 0.10 in. Gray Powder Coated Aluminum 30° Angle Bracket (For -USM30 SKUs Only)
  • Exterior Size: 9.30 x 13.38 x 3.96 in. (236.2 x 339.9 x 100.6 mm)
  • Interior Size: 9.02 x 10.74 x 3.68 in. (229.1 x 272.8 x 93.5 mm)

Accessories

Safety & Standards

    For use with the follow APs:

    Aruba
    AP-515, AP-505, AP-315, AP-305, AP-225, AP-215, AP-205, AP-325
    Cisco
    2800i/3800i Series, 1830i/1850i Series, 1600i/1700i/2600i/2700i/3500i/3600i/3700i Series
    Extreme Networks
    AP305C, AP505i / AP510i, AP410i, 460i
    Meraki
    MR 52/53, MR 33, MR 32/34/42
    Mist
    AP41
    Ruckus
    R650, R550
    Ubiquiti
    UniFi UAP-AC-HD, UniFi UAP-XG
    Download PDF Wall Mounted
    Wall Mounted

    Oberon’s Skybar™ 1020 series compact NEMA 4 AP enclosure is designed specifically to protect APs in challenging environments such as stadiums, auditoriums, gymnasiums, industry and outdoors. This rugged polycarbonate enclosure protects the AP from weather, pressure spray, spilling liquids, dust, and impacts, and is transparent to wireless signals so APs with body integrated antennas or small detachable antennas may be protected. The enclosure is paintable, and can be used to conceal and protect APs in many challenging locations. This is the most compact NEMA 4 enclosure for most APs. Available with clear cover (-C), Right Angle Bracket (-RAB) for wall mounting, or with Pole Mount Kit (PMK) for mounting on light poles. For under seat installations in auditoriums and public venues, Oberon recommends using the 1020-USM30 configuration with the 30º mounting bracket.

    Features & Benefits

    • Compact, rugged NEMA 4 Skybar™ shaped enclosure for installing APs in physically challenging environments
    • Virtually transparent to wireless signals
    • Plastic is easily drilled and machined for custom cable ingress and installation. Enclosure is paintable
    • Cover attaches with four tamper resistant stainless steel screws, available with clear cover
    • Available in under seat mounting (1020-USM30), wall mounting (1020-RAB), and pole mounting (1020-PMK) configurations

    Technical Specifications

    • Design: Compact, rugged polycarbonate AP enclosure designed for surface mounting AP indoors or outdoors, and for under seating and riser installation, wall mounting, or light pole mounting. Conceal and protect AP and cabling
    • Performance: Designed to NEMA 1, 2, 4, 4X, 12, and 13, and IEC529-IP66 specifications for indoor/ outdoor wet, dirty, or corrosive environments. UV stabilized for exposure to direct sunlight. Transparent to wireless signals. Paintable
    • Oberon Skybar™ shaped screw on cover with gasket. Cover screws must be torqued to 8 in-lbs. Cover screws are recessed into cover. Comes with standard and tamper resistant screws
    • Internal universal T-bar bracket to attach most vendor’s APs
    • -C configuration has a clear screw on cover to allow visibility of status LEDs
    • -RAB configuration mounts AP in preferred horizontal orientation on walls. Right angle bracket acts as a sun shield to reduce solar heat load
    • -PMK configuration has adjustable worm gear clamps for square and round poles with diameters from 4 to 7 in. (requires -RAB)
    • -USM30 mounts AP at 30° angle in under seat installations, or on high wall
    • For similar enclosures accommodating Cisco Series 4800 APs, please refer to Oberon Models 1021 or 1022
    • AP max. operating temperature should be de-rated by 11° C inside the enclosure, when solar loading is not present (See Oberon application note)
    • For outdoor installation, the 1020 is very light grey to reduce solar loading. Painting the 1020 a darker color will increase solar loading. Avoid mounting 1020 where it is directly exposed to the sun. The -RAB and -RAB-PMK versions right angle bracket acts as a solar shield
    • Construction: Gray Textured UL94-V0 Polycarbonate Enclosure Base, Gray Textured UL94-V0 Polycarbonate Enclosure Cover (For -00 SKUs Only), Clear Textured UL94-V0 Polycarbonate Enclosure Cover (For -C SKUs Only), 18 Ga. White Powder Coated Steel T-Bar Bracket, 10 Ga. Gray Powder Coated Steel Right-Angle Bracket (For -RAB SKUs Only), 14 Ga. Gray Powder Coated Steel Pole Mount Brackets (For -PMK SKUs Only), 0.10 in. Gray Powder Coated Aluminum 30° Angle Bracket (For -USM30 SKUs Only)
    • Exterior Size: 9.30 x 13.38 x 3.96 in. (236.2 x 339.9 x 100.6 mm)
    • Interior Size: 9.02 x 10.74 x 3.68 in. (229.1 x 272.8 x 93.5 mm)

    Safety & Standards

      Measurements (Maximum values*):
      Width: 9.3 in. Height: 12.79 in. Depth: 7.06 in. Item Weight: 7 lbs. Shipping Weight: 8 lbs.
      Includes:
      • (1) Enclosure
      • (1) T-Bar Bracket
      • (4) M4 x 20 mm Captive Phillips Lid Screws
      • (4) M4 x 20 mm Captive Torx Lid Screws
      • (4) #6 x 5/16 in. Pan Head Thread-Forming Screws for Plastic
      • (4) #6 x 5/16 in. Flat Head Thread-Forming Screws for Plastic
      • (4) Cushioning Washers
      • (1) Right Angle Bracket (For -RAB SKUs Only)
      • (4) M4 x 12 mm Button Head Socket Cap Screw (For -RAB SKUs Only)
      • (1) Pole Mount Bracket (For -PMK SKUs Only)
      • (2) 5-5/8 to 8-1/2 in. Worm-Drive Clamps (For -PMK SKUs Only)
      • (3) #10 x 3/8 in. Slotted Hex Head Screws (For -PMK SKUs Only)
      • (1) 30° Angle Bracket (For -USM30 SKUs Only)
      • (1) Metal Double Gang Outlet Box Flat Blank Cover (For -USM30 SKUs Only)
      • (4) #8 x 5/16 in. Phillips Truss Head Screws (For -USM30 SKUs Only)
      • (4) #10 x 1/2 in. Phillips Pan Head Screws (For -USM30 SKUs Only)
      • (4) #10 EPDM Rubber Sealing Washers (For -USM30 SKUs Only)
      • (4) #10 Stainless Steel Washers (For -USM30 SKUs Only)
      • Installation Instructions

      Resources

      Customer Print
      Download PDF
      Installation Instructions
      Download PDF
      Configuration Guide
      Download PDF
      Section 27_21_33 Data Communications Wireless Access Points
      Download PDF
      App Note - Wireless Coverage FAQ
      Download PDF
      App Note - Installation Tips for Outdoor Models
      Download PDF
      App Note - Calculating Temperature Rise
      Download PDF