1021-00-PMB-CVR

21 in. Skybar™ NEMA-4 Plastic Wi-Fi Access Point Enclosure with Opaque Screw-on Cover & Pole Mounting Bracket Accessory
Collection: Skybar™ | Series: 1021

This NEMA 4 enclosure is designed specifically to protect and conceal APs, antennas, and cabling in environments where aesthetics is paramount, and typical ‘industrial’ NEMA 4 enclosures are not acceptable due to their appearance. The model 1021 is white with a unique ‘Skybar™’ shaped lid with recessed screws and internal mounting features for most vendor’s APs and antennas. This rugged polycarbonate enclosure protects the AP from weather, pressure spray, spilling liquids, dust, and impacts, and is transparent to wireless signals, so larger APs with external antennas can be protected. The 1021 is paintable. Available with internal directional antenna mounting plate (-ANTPLATE) and/or pole mounting bracket (PMB).

Features & Benefits

  • Aesthetic ‘Skybar™’ shaped enclosure for installing, protecting and concealing APs, antennas, and cabling in environments where aesthetics is paramount
  • Virtually transparent to wireless signals
  • Plastic is easily drilled and machined for custom cable ingress and installation. Enclosure is paintable
  • Cover attaches with eight tamper resistant captured stainless steel screws, silicon sponge gasket material provides seal
  • Large enough for larger APs from most vendors, antennas, and associated cabling

Technical Specifications

  • Design: Rugged polycarbonate AP enclosure designed for surface mounting AP indoors or outdoors, including wall mounting, or light pole mounting. Conceal and protect AP, antennas, and cabling
  • Performance: Designed to NEMA 1, 2, 4, 4X, 12, and 13, and IEC529-IP66 specifications for indoor/outdoor wet, dirty, or corrosive environments. UV-stabilized for exposure to direct sunlight. Transparent to wireless signals. Paintable
  • Oberon Skybar™-shaped screw on cover with gasket; cover screws must be torqued to 8 in-lbs.; cover screws are recessed into cover
  • Internal universal T-bar bracket and universal mounting panel
  • Large enough for Cisco 3800 DART connector and external antenna, and Cisco 4800 AP
  • -00 Base Configuration
  • -ANTPLATE: Includes interior AP and articulating directional antenna mounting plate and bracket
  • -PMB: Includes Oberon 39-POLE-MOUNT-BRACKET for mounting on 4 to 7in. diameter square or round poles
  • -CVR: Includes Oberon color matched back cover to conceal the Pole Mount Bracket and cabling. (Requires -PMB). The cover acts as a partial sun shield to reduce solar heat load
  • AP max. operating temperature should be de-rated by 5° C inside the enclosure, when solar loading is not present (See Oberon application note)
  • For outdoor installation, the 1021 is white to reduce solar loading. Painting the 1021 a darker color will increase solar loading. Avoid mounting the 1021 where it is directly exposed to the sun. The -PMB-CVR configuration acts as a partial solar shield
  • Temperature rating: -40 to 120° C
  • Construction:

    • -00: body and cover are white UL94-V0 Polycarbonate
    • -ANTPLATE: zinc plated steel AP and articulating antenna mount
    • -PMB: Adjustable worm gear stainless steel clamps for square and round pole mounting
    • -CVR: Screw-on cover is white UL94-V0 polycarbonate and ONLY available with -PMB

  • Exterior Size: 21.0 x 13.5 x 5.5 in. (533 x 343 x 140 mm). Interior dimensions 19.4 x 12.0 x 5.25 in. (493 x 305 x 133 mm)
Download PDF Shown with AP (not included)
Shown with AP (not included)
Fits the following AP’s:
Aerohive
AP370, AP340/350, AP330, AP320, AP250, AP20, AP110/120
Aruba
AP-ANT-17/AP-ANT-18/AP-ANT-25/AP-ANT-35/AP-ANT-35A/ANT-2x2-5314, AP-93H, AP-555, AP-535, AP-515, AP-505, AP-345, AP-344, AP-335, AP-334, AP-325, AP-324, AP-318, AP-315, AP-314, AP-305, AP-303, AP-228, AP-225, AP-224, AP-215, AP-214, AP-205, AP-135, AP-134
Cisco
AIR-ANT2566P4W-R antenna, AIR-ANT2566D4M-R antenna, 4800 Series, 2800i/3800i Series, 2800e/3800e Series with DART Connector, 2800e/3800e Series, 1830i/1850i Series, 1830e/1850e Series, 1600i/1700i/2600i/2700i/3500i/3600i/3700i Series, 1600e/2700e/3500e/3600e/3700e/3700p Series, 1572ic, 1572eac/1572ec, 1562i, 1562e, 1562d, 1542i/1542d, 1532i, 1532e
Commscope
ION-E
Extreme Networks
AP3965i, AP3935i, AP3825i, AP3805i, AP3801i, AP3765i, AP3715i, AP3710i, AP3705i
Meraki
MR 66, MR 62, MR 53E, MR 52/53, MR 42E, MR 33, MR 32/34/42
Mist
AP41
Ruckus
R720, R710, R610, R510, R320, R310, 7352 and 7372, 7300 Series and 7025, 2942 and 7962
Ubiquiti
UniFi UAP-AC-HD, UniFi UAP-XG

This NEMA 4 enclosure is designed specifically to protect and conceal APs, antennas, and cabling in environments where aesthetics is paramount, and typical ‘industrial’ NEMA 4 enclosures are not acceptable due to their appearance. The model 1021 is white with a unique ‘Skybar™’ shaped lid with recessed screws and internal mounting features for most vendor’s APs and antennas. This rugged polycarbonate enclosure protects the AP from weather, pressure spray, spilling liquids, dust, and impacts, and is transparent to wireless signals, so larger APs with external antennas can be protected. The 1021 is paintable. Available with internal directional antenna mounting plate (-ANTPLATE) and/or pole mounting bracket (PMB).

Features & Benefits

  • Aesthetic ‘Skybar™’ shaped enclosure for installing, protecting and concealing APs, antennas, and cabling in environments where aesthetics is paramount
  • Virtually transparent to wireless signals
  • Plastic is easily drilled and machined for custom cable ingress and installation. Enclosure is paintable
  • Cover attaches with eight tamper resistant captured stainless steel screws, silicon sponge gasket material provides seal
  • Large enough for larger APs from most vendors, antennas, and associated cabling

Technical Specifications

  • Design: Rugged polycarbonate AP enclosure designed for surface mounting AP indoors or outdoors, including wall mounting, or light pole mounting. Conceal and protect AP, antennas, and cabling
  • Performance: Designed to NEMA 1, 2, 4, 4X, 12, and 13, and IEC529-IP66 specifications for indoor/outdoor wet, dirty, or corrosive environments. UV-stabilized for exposure to direct sunlight. Transparent to wireless signals. Paintable
  • Oberon Skybar™-shaped screw on cover with gasket; cover screws must be torqued to 8 in-lbs.; cover screws are recessed into cover
  • Internal universal T-bar bracket and universal mounting panel
  • Large enough for Cisco 3800 DART connector and external antenna, and Cisco 4800 AP
  • -00 Base Configuration
  • -ANTPLATE: Includes interior AP and articulating directional antenna mounting plate and bracket
  • -PMB: Includes Oberon 39-POLE-MOUNT-BRACKET for mounting on 4 to 7in. diameter square or round poles
  • -CVR: Includes Oberon color matched back cover to conceal the Pole Mount Bracket and cabling. (Requires -PMB). The cover acts as a partial sun shield to reduce solar heat load
  • AP max. operating temperature should be de-rated by 5° C inside the enclosure, when solar loading is not present (See Oberon application note)
  • For outdoor installation, the 1021 is white to reduce solar loading. Painting the 1021 a darker color will increase solar loading. Avoid mounting the 1021 where it is directly exposed to the sun. The -PMB-CVR configuration acts as a partial solar shield
  • Temperature rating: -40 to 120° C
  • Construction:

    • -00: body and cover are white UL94-V0 Polycarbonate
    • -ANTPLATE: zinc plated steel AP and articulating antenna mount
    • -PMB: Adjustable worm gear stainless steel clamps for square and round pole mounting
    • -CVR: Screw-on cover is white UL94-V0 polycarbonate and ONLY available with -PMB

  • Exterior Size: 21.0 x 13.5 x 5.5 in. (533 x 343 x 140 mm). Interior dimensions 19.4 x 12.0 x 5.25 in. (493 x 305 x 133 mm)
Measurements (Maximum values*):
Width: 22 in. Back-box: xx in. Height: 14.25 in. Depth: 15 in. Item Weight: 10 lbs. Shipping Weight: 11 lbs.
Includes:

  • (1) Enclosure
  • (1) T-Bar Bracket
  • (4) Wall Mounting Brackets
  • (8) Captured M4 x 20 mm Stainless Steel Pan Head Machine Screws
  • (4) #10 x 3/8 in. Truss Head Machine Screws
  • (4) #6 x 1/4 in. Pan Head Screws for Plastic
  • (4) M4 x 8 mm Flat Head Screws
  • (1) Universal Mounting Panel
  • (4) Cushioning Washers
  • (1) Antenna Mounting Bracket (with -ANTPLATE)
  • (8) #6 x 3/8 in. Pan Head Screws for Plastic (with -ANTPLATE)
  • (4) #8-32 x 5/8 in. Pan Head Screws (with -ANTPLATE)
  • (4) #6-32 x 1/2 in. Pan Head Screws (with -ANTPLATE)
  • (2) Pole Mount Brackets (with -PMB)
  • (2) 7-1/8 to 10 in. Worm-Drive Clamps (with -PMB)
  • (4) 1/4″-20 x 3/4 in. Hex Head Screws (with -PMB)
  • (4) M4 x 12 mm Hex Head Screws (with -PMB)
  • (4) Aluminum 3/8 in. Spacers (with -PMB)
  • (4) M4 Washers (with -PMB)
  • (1) White ABS Cover with UV Clamp (Only with -PMB-CVR configurations)
  • Installation instructions

Resources

Customer Print
Download PDF
Installation Instructions
Download PDF
Section 27_21_33 Data Communications Wireless Access Points
Download PDF