33-VCVR-18125

18 x 12 x 5 in. Translucent black Polycarbonate cover for larger APs and antennas
Collection: AP Covers | Series: Access Point Covers

Conceal or customize the appearance of larger Wi-Fi APs and antennas with this detachable cover. This cover is made from a translucent polycarbonate plastic which is virtually transparent to wireless signals. The cover is translucent so that the status LEDs are visible. Mount APs and antennas from most vendors to the surface mount frame, and snap on the cover. Ideal for concealing APs in indoors in open, exposed structure ceilings in hospitality and retail spaces.

Features & Benefits

  • Conceal larger Wi-Fi APs in open, exposed structure ceilings
  • Translucent so status LED is visible
  • Large enough to cover most vendors APs and antennas
  • Improve installation aesthetics in hospitality and retail environments

Technical Specifications

  • Design: Surface mount frame and translucent, black polycarbonate plastic cover to mount and conceal larger APs and Antennas in indoor open, exposed structure ceiling environments
  • Thin polycarbonate plastic is virtually transparent to wireless signal
  • Construction: 0.065 in. (1.65 mm) thick, black, UL94 HB polycarbonate cover, galvanized steel frame
  • Size: 18 x 12 x 5 in (460 x 305 x 130 mm) (See the AP Cover Selection Guide in the Resources section)
  • Made in the USA

For use with the following Wi-Fi/Small Cell Access Points:

Aerohive
AP250, AP320, AP330, AP340/350, AP370
Arista
C-130, C-230, C-260
Aruba
AP-303, AP-305, AP-314, AP-315, AP-324, AP-325, AP-334, AP-335, AP-344, AP-345, AP-504, AP-505, AP-514, AP-515, AP-534, AP-535, AP-555
Cisco
1830e/1850e Series, 1830i/1850i Series, 2800e/3800e Series, 2800i/3800i Series, 4800 Series, 9105W, 9115AXE, 9115AXI, 9117AX, 9120AXE, 9120AXI, 9130AXE, 9130AXI
Extreme Networks
AP3935i, AP410C, AP410e, AP410i, AP510C, AP510e
Meraki
MR32/34/42, MR33, MR36, MR42E, MR44/45/46, MR53E, MR55/56
Mist
AP41
Ruckus
R600, R610, R650, R700, R710, R720, R730, R750
Download PDF
Shown mounted on wall with Cisco 9120e (not included)
Shown mounted on wall with Cisco 9120e (not included)

Conceal or customize the appearance of larger Wi-Fi APs and antennas with this detachable cover. This cover is made from a translucent polycarbonate plastic which is virtually transparent to wireless signals. The cover is translucent so that the status LEDs are visible. Mount APs and antennas from most vendors to the surface mount frame, and snap on the cover. Ideal for concealing APs in indoors in open, exposed structure ceilings in hospitality and retail spaces.

Features & Benefits

  • Conceal larger Wi-Fi APs in open, exposed structure ceilings
  • Translucent so status LED is visible
  • Large enough to cover most vendors APs and antennas
  • Improve installation aesthetics in hospitality and retail environments

Technical Specifications

  • Design: Surface mount frame and translucent, black polycarbonate plastic cover to mount and conceal larger APs and Antennas in indoor open, exposed structure ceiling environments
  • Thin polycarbonate plastic is virtually transparent to wireless signal
  • Construction: 0.065 in. (1.65 mm) thick, black, UL94 HB polycarbonate cover, galvanized steel frame
  • Size: 18 x 12 x 5 in (460 x 305 x 130 mm) (See the AP Cover Selection Guide in the Resources section)
  • Made in the USA
Measurements (Maximum values*):
Width: 18 in. Height: 12 in. Depth: 5 in. Item Weight: 1 lbs. Shipping Weight: 2 lbs.

Resources

Customer Print
Download PDF
Installation Instructions
Download PDF
AP Cover Accessory Guide
Download PDF
Section 27_21_33 Data Communications Wireless Access Points
Download PDF